Table of Contents
Advertisement
To verify that the accumulate
function is installed, press the
DISP ACCUM key. If present,
the ACCUM annunciator on the
left side of the display will light.
DISP
ACCUM
NOTE:
Five accumulators are available
with the accumulator software
feature. One accumulator is
provided for each channel
including the total channel.
When you press the PRINT key,
the accumulator corresponding
to the current display channel
will be updated. To allow
maximum flexibility, you can
access all five of the accumula-
tors regardless of which channel
is being displayed, or how many
channels are active.
NOTE:
None of the accumulators can be
used while using the truck
program.
ACCUMULATE FUNCTION (STANDARD FEATURE)
The Accumulate function (represented by the PSHACCUM submenu, under
the SETPNTS menu) is used to add weight data to a register for later access
by the user. The accumulator can keep a running total of weights entered
either automatically by the setpoints, or manually by a user pressing the
PRINT key when the accumulate function is active.
With either the automatic or the manual entry method, the register will
accumulate gross weight values only if no tare has been entered into the
system. If a tare has been entered (indicated by the
being lit), the accumulator will automatically always add net weight to the
register.
To verify that the accumulate function is ON, press the DISP ACCUM key.
If ON, the ACCUM annunciator on the left side of the display will light.
In the normal operating mode with accumulate active and a weight value on
the display, press the PRINT key to store that value in the accumulate
register. Subsequent pressing of the PRINT key will add whatever value is
on the display to the register. To view the accumulated weight currently in
the register, press the DISP/ACCUM key. The ACCUM annunciator will
light, and a value will appear on the display. That value is the total currently
in the accumulator register. With that number displayed, pressing the
PRINT key again prints the accumulated weight through any serial port
configured in the "Demand" mode.
When PRINT is used as above to print out the displayed register, that value
is not accumulated in the register — in other words, the register does not
accumulate itself when printed. The display will return to normal weight
display after five seconds without a key stroke, or by pressing the N/G key.
The total accumulated weight can be cleared from the register by pressing
the DISP/ACCUM key until the total accumulated weight is displayed and
then pressing the CLEAR key. The display will then prompt the operator
with "CLEAR ACC?". You must then press the CLEAR key again to clear
the register. If you do not want to clear the accumulate register, you can
press the N/G key to exit the accumulator function; or, you can wait five
seconds without making a key stroke to automatically go back to the normal
weighing mode.
Five accumulators are available with the accumulator software feature. One
accumulator is provided for each channel including the total channel. When
the PRINT key is pressed, the accumulator corresponding to the current
display channel will be updated. To allow maximum flexibility, you can
access all five of the accumulators regardless of which channel is being
displayed, or how many channels are active.
The automatic accumulator can be tied to the setpoints for automatic
operation. The automatic accumulate function can be tripped immediately
when the setpoint value is reached, or after the value is reached AND when
the scale achieves standstill.
Parameter settings for the setpoint-activated accumulate functions are found
under the PSHACCUM submenu, in the first level SETPNTS menu. See
Section 3, Configuration, for layout.
or
annunciator
T
T
E
Optional features
8-3
Advertisement
Table of Contents
