Truck In/Out Modes - Rice Lake IQ plus 800 Installation & Operation Manual

®
5-2 IQplus 800/810 Installation Manual

TRUCK IN/OUT MODES

CONFIG
200TARE
OFF MODE 1
The truck in/out modes handle multiple truck ID numbers and tare weights.
There are six modes which allow you to combine features in various ways
(see Table 5-1).
Table 5-1.
Truck mode features
MODE 1
MODE 2
MODE 3
MODE 4
MODE 5
MODE 6
OFF
Stored IDs let you keep a database of truck IDs and tare weights in the
indicator's memory. The indicator can automatically store up to 200 truck
IDs and tares; or it can clear the information after printing a weigh-out
ticket. For example, if the same truck seldom crosses the scale, it may not be
practical to save its ID number and tare weight. However, if that same truck
crosses the scale many times each day, it's much more convenient to store
the information in the indicator's memory, so you can simply recall it when
needed. Stored IDs and tare weights are available in Modes 3, 4, 5, and 6.
Keyed tares allow you to manually enter the tare weight from the keyboard.
Keyed tares are available in Modes 1, 3, and 5.
Value swapping ensures that the lowest of two weight values associated
with a particular ID number is entered as the tare weight. For example, if a
truck crosses the scale fully loaded at weigh-in, then unloads and crosses the
scale empty at weigh-out, the indicator automatically assigns the lesser
(empty truck) weight as the tare. Value swapping is available in Modes 1, 2,
3, and 4.
MODE 2 MODE 3 MODE 4
Stored IDs Keyed tares
no yes
no no
yes yes
yes no
yes yes
yes no
— —
MODE 5 MODE 6
Value swapping
yes
yes
yes
yes
no
no
—