Service Parts Disassembly
Registration Roller Solenoid (PL4.12.3)
Precaution for Reinstallation
8-104
1.
Remove the Right Cover (page 8-8).
2.
Remove the Power Supply Cooling Fan Motor Assembly (page 8-94).
3.
Lift upwards on the tab and the guide.
4.
Disconnect the connector, remove 1 screw (metal, 8mm), and then
remove the Registration Roller Solenoid.
Confirm that the registration roller solenoid is securely seated on the
alignment pins, before securing screw to the chassis.
Reinstall the solenoid so that the clearance between the gear of the
registration roller clutch and flapper falls within the specified range (1.0 ±
0.2 mm).
Phaser 6115MFP Multifunction Product Service Manual
s6115-331