Additional Adf Adjustment Procedures; Adf Fd Magnify - Xerox Phaser 6115MFP Service Manual

Adjustments and Print Function Settings

Additional ADF Adjustment Procedures

ADF FD Magnify

6-50
Adjusts the scanning zoom ratio in the FD (feed) direction of the Auto
Document Feeder Unit.
When to Use:
When a new Auto Document Feeder Unit is mounted.
Specification:
200 mm ± 1.4 mm
Adjustment Range:
The default setting is 0%.
Adjustment Range: -5% ~ +5%
Procedure:
1. Prepare a test chart (A4 or 11 x 8 1/2) as shown below:
Draw a 200-mm-long straight line A, starting with a point 20 mm from
the left edge and 105 mm from the top edge
105 mm
2. Enter the SERVICE MODE.
3. Select [ADF FD MAGNIFY] of [1 ADJUST] and press the Menu/Select
key.
4. Load the test chart in the ADF and press the Start key.
5. Measure the length of line A on the copy to check that it falls within the
specified range.
20 mm
200 mm
Phaser 6115MFP Multifunction Product Service Manual
A
s6115-361