Xerox Phaser 6115MFP Service Manual page 10

Service Safety Summary
General Guidelines
viii
For qualified service personnel only:
Precautions.
Avoid servicing alone:
product unless another person capable of rendering first aid or resuscitation is
present.
Use care when servicing with power:
points in this product. To avoid personal injury, do not touch exposed
connections and components while power is on. Disconnect power before
removing the power supply shield or replacing components.
Do not wear jewelry:
other metallic objects could come into contact with dangerous voltages and
currents.
Warning Labels
Read and obey all posted warning labels. Throughout the printer, warning
labels are displayed on potentially dangerous components. As you service the
printer, check to make certain that all warning labels remain in place.
Safety Interlocks
Make sure all covers are in place and all interlock switches are functioning
correctly after you have completed a printer service call. If you bypass an
interlock switch during a service call, use caution when working on or around
the printer.
CLASS 1 LASER PRODUCT
The Phaser 6115MFP Multifunction Product is certified to comply with Laser
Product Performance Standards set by the U.S. Department of Health and
Human Services as a Class 1 Laser Product. This means that this product
does not emit hazardous laser radiation; which is possible only because the
laser beam is totally enclosed during all modes of customer operation. When
servicing the printer or laser unit, follow the procedures specified in this
manual and there will be no hazards from the laser.
Refer also to the preceding Power Safety
Do not perform internal service or adjustment of this
Dangerous voltages may exist at several
Remove jewelry prior to servicing. Rings, necklaces and
Phaser 6115MFP Multifunction Product Service Manual