Theory of Operation
Toner Cartridge Rack
2-24
The Toner Cartridge Rack holds the four Toner Cartridges and rotates to
position each cartridges' Developer Roller in the developing position. The rack
is driven by the Rack Motor.
The Toner Cartridge Rack has three stop positions: the standby (reference)
position, the developing position, and the cartridge replacement position:
The standby position is the Toner Cartridge Rack position when the
system completes a warm-up cycle or waits for a print command.
The development position is when the Toner Cartridge Rack stops during
development of a specific color of toner.
The cartridge replacement position refers to the position at which the
Toner Cartridge Rack is stopped for replacement of the Toner Cartridge of
a specific color of toner.
s6115-065
Phaser 6115MFP Multifunction Product Service Manual