Colored Spots - Xerox Phaser 6115MFP Service Manual

Print-Quality Troubleshooting

Colored Spots

Initial Actions
5-28
Troubleshooting Procedure Table (Continued)
Step Actions and Questions
5 Is the Transfer Roller
scratched?
6 Check the paper path.
Is there a foreign object or
obstruction in the path?
7 Inspect the Fusing Unit.
Are the green nip release
levers in the closed
position?
Has the problem been
8
eliminated?
Random colored spots on copies.
Verify the media used is supported by this printer.
Verify the media settings are correct at the Control Panel.
Troubleshooting Reference Table
Applicable Parts
Imaging Unit, PL4.15.9
Toner Cartridge (see Consumables Parts
List)
Transfer Belt Unit, PL4.15.5
Fusing Unit, PL4.18.12
Yes
Replace the roller
(page 8-86). If the
problem persists, go
to Step 6.
Remove the object and
reprint the test sheet.
If the problem
persists, go to Step 7.
Close the green nip
release levers and go
to Step 8.
Complete
Example Print
Chrysanthemum x morifolium
Phaser 6115MFP Multifunction Product Service Manual
No
Go to Step 6.
Go to Step 7.
Go to Step 8.
Replace the toner
cartridge (page 7-11)
and the Laser Unit
(page 8-15).
White Portion is Colored