Xerox Phaser 6115MFP Service Manual page 5

Service Terms
Manual Terms
Product Terms
Phaser 6115MFP Multifunction Product Service Manual
Various terms are used throughout this manual to either provide additional
information on a specific topic or to warn of possible danger present during a
procedure or action. Be aware of all symbols and terms when they are used,
and always read NOTE, CAUTION, and WARNING statements.
Common Acronyms:
The following list defines the acronyms that may be found in this manual.
ADC: Automatic Density Control
BTR: Bias Transfer Roller
CTD: Toner Density Control
ECB: Engine Control Board
ESD: Electrostatic Discharge
Note
A note indicates an operating or maintenance procedure, practice or
condition that is necessary to efficiently accomplish a task.
A note can provide additional information related to a specific subject or
add a comment on the results achieved through a previous action.
Caution
A caution indicates an operating or maintenance procedure, practice or
condition that, if not strictly observed, results in damage to, or destruction
of, equipment.
Warning
A warning indicates an operating or maintenance procedure, practice or
condition that, if not strictly observed, results in injury or loss of life.
Caution: A personal injury hazard exists that may not be apparent. For
example, a panel may cover the hazardous area.
Danger:
A personal injury hazard exists in the area where you see the sign.
FRU: Field Replaceable Unit
IPB: Image Processor Board
IU: Imaging Unit
NCS: Non-Contact Sensor
PL: Corresponds to the FRU Parts List.
iii