Xerox Phaser 6115MFP Service Manual page 357

Phaser 6115MFP Multifunction Product Service Manual
5. To reinstall, move the pieces in Step 4 to the new roller.
Caution
Do not touch the surface of the roller.
Metal Cap
6. Snap the roller into position.
7. When the Transfer Roller is replaced with a new one, it is necessary to
reset the life counter in the Service menu.
Reassembly Procedures
1. Align the spring with the post on the plastic housing.
2. Make sure that the drive gear on the Transfer Roller is aligned with the
coupling on the right side of the printer.
Collar
Collar
Holder
Service Parts Disassembly
Holder
s6115-269
8-87