Cleaning Blade Solenoid (Pl4.11.2) - Xerox Phaser 6115MFP Service Manual

Cleaning Blade Solenoid (PL4.11.2)

Phaser 6115MFP Multifunction Product Service Manual
1. Use the procedures for removing the right cover (page 8-8).
2. Remove the Right Frame (page 8-90).
3. Remove 1 screw (metal, 8mm), disconnect the connector, and remove the
Cleaning Blade Solenoid.
Replacement Note
When reinstalling, make sure the actuator is behind the gear.
Service Parts Disassembly
s6115-332
CN3
s6115-333
8-105