Service Diagnostics Test Menu Functions; Table 3-2 Service Diagnostics Test Menu Functions - Xerox Phaser 7700 Service Manual

In all the service tests,
The Back or Cancel button can be used to abort a test and return you to
the menu from where the test began.
The OK button either enters the next lower level menu or causes the
highlighted test to execute.
The Up and Down keys highlight test options or selection of an
appropriate entry while executing a test. If there is a numeric value that
must be entered these keys are used to adjust that value.
The Info button is used to post information or define a mnemonic. Press
the Info or OK button again to remove the text and restore the menu.

Service Diagnostics Test Menu Functions

Table 3-2 Service Diagnostics Test Menu Functions

Test Front Panel Display
Print Service Menu Map
Prints the service diagnostics menu page
General Status
Provides current print engine status
Engine ROM Engine Version is 3.60
Version
Video ASIC Version: 1.15
Configuration 3TM or HCF, if present
+Duplexer +Finisher (if present)
Ambient Temperature is XX
Temp/Humidity
Humidity is XX%
Fuser Front Temp is XXX
Temperature Back Temp is XXX
Fault List No Faults Detected
<nn,nnn> Fault Text
Front Panel Adjust Contrast?
Adjust Yes
No
Backlight On?
Yes
No
Jam Info No Static Jam Detected
or
Static Jam: area name
2-36
Phaser 7700 Color Printer
Test Operation, Results and
Function
Definition
Prints Current engine status.
Displays optional components.
3TM=LTD
o
C Displays current temperatures.
o
C Displays current temperature.
o
C
Power up only - current static
condition, not a history log.
Adjust Value: 1 - 15: 8 Default
1. Highlight Yes and press OK.
1. Press UP/Down to Adjust.
2. Press OK to accept new value and
exit.
Location of Jam