Table of Contents
Advertisement
2
Assembly for Bright-field Microscopy
[Tool for assembly: Hex driver]
1
Check the input voltage.
Check the input voltage indicated on the back of the
microscope. Use the microscope only if the indicated
input voltage matches the power supply voltage for the
area in which the microscope will be used.
WARNING
If the indicated voltage and the supplied voltage differ,
do not attempt to use the microscope. Contact your
nearest Nikon representative for advice.
2
Attach the stage.
(1)
Turn the coarse focus knob to remove the
cushioning material from the substage section.
(2)
Turn the coarse focus knob until the elevating
section is brought to the lowermost position.
(3)
Place the stage on the substage and fix into place
with the stage clamp screw.
Insert the filter cassette holder on the field lens of
the microscope after the stage has been raised up
Chap. 3
to the upper limit.
The filter cassette holder cannot be used
simultaneously with the spacer for the nosepiece.
Chapter 3
Using the filter cassette holder
Exclusivity of the filter cassette holder
and the spacer for the nosepiece
Assembly
Input voltage
label
Checking the input voltage
Stage clamp screw
Attaching the stage
0.9
0.8
Filter cassette holder
Attaching a filter cassette holder
68
DS C
0.5
0.4
0.3
0.2
0.1
Advertisement
Table of Contents
