Table of Contents
Advertisement
9
Connect the power cord.
WARNING
Be sure to use the specified power cord. Use of other power cords may result in malfunction or fire. This product is
classified as having Class I protection against electric shock. Make sure this product is connected to an appropriate
protective earth terminal.
Refer to Chapter 6, "2 Performance Properties" for the specified power cords.
To prevent electric shock, always turn off the power switch (press to the "O" position) for the microscope before
connecting or disconnecting the power cord.
(1)
Check that the microscope power switch is OFF.
(2)
Plug the power cord into the AC inlet at the back of
the microscope.
(3)
Plug the other end of the power cord into a wall
outlet.
Assembly of the system configuration required for bright-field
microscopy is now completed.
Chap. 3
Chapter 3
Assembly
72
Power switch OFF
(press to the "O" position)
AC inlet
Connecting the power cord
D S C
Advertisement
Table of Contents
