Nikon Eclipse Ci-E Instruction Manual page 65

(4) Set the setting mode switch to the left side to operation
mode.
Nosepiece address buttons 1 to 6 light for a few seconds to
indicate that setup is complete.
Setup via DS-L4 Microscope Camera Control
Unit or a PC
The toggle pattern can also be configured via DS-L4
Microscope Camera Control Unit or Ni Setup Tool. See the
respective instruction manual for the details of settings with
DS-L4 and Ni Setup Tool.
Operation when using the toggle function
To use the toggle function, press the toggle pattern switch to
select "toggle pattern 1" or "toggle pattern 2."
To switch between the two objectives, press the nosepiece
forward/reverse rotation buttons (the two buttons are not
differentiated when using the toggle function).
Nosepiece address buttons
Pressing a nosepiece address button when using the
toggle function allows you to bring a desired address to the
optical path.
To stop using the toggle function, press the toggle pattern switch
until the toggle function is turned OFF.
Operation
Toggle
pattern switching
Toggle function OFF
Toggle pattern 1
Toggle pattern 2
Chapter 2
Individual Operations
Nosepiece Operation
Microscope main body
Nosepiece forward
rotation button
Nosepiece forward rotation
(incrementing the address)
Switching between two addresses
configured in the toggle pattern 1.
Switching between two addresses
configured in the toggle pattern 2.
MEMORY
TOGGLE
PATTERN
Toggle pattern switch
 Toggle function OFF
 Toggle pattern 1
 Toggle pattern 2
Nosepiece reverse rotation
button
Nosepiece reverse rotation
(decrementing the address)
53
Toggle address LED
LEDs for the addresses set for
the toggle pattern light up.
OFF 1 2
MEMORY
Nosepiece
address
buttons
Remote control pad
Nosepiece address
buttons
Rotate to the specified
address
Chap. 2