Set Date; Set Time - Sun Microsystems StorEdge L400 Installation And User Manual

2. Select Back Light by pressing
3. Turn Back Light on by pressing
pressing
7.3.6

Set Date

Use the Set Date screen to set the date shown on the diagnostic listings and the
command history screen
1. Select the Configuration Menu by pressing
2. Select Set Date by pressing
3. Set the date using these keys.
7.3.7

Set Time

Use the Set Time screen to set the time shown on the Main Screen and the
command history screen.
1. Select the Configuration Menu from the Primary Menu by
pressing
2. Select Set Time by pressing
3. Set the time using these keys.
7-10 Sun StorEdge L400 Installation and User's Guide • April 1998
←
.
↓
↑
Increases the day, month, or year.
↓
Decreases the day, month, or year.
→
Moves to the column on the right.
←
Moves to the column on the left.
↓ ↑
or , then Enter.
↓
↑
Increases the hours, minutes, or seconds.
↓
Decreases the hours, minutes, or seconds.
→
Moves to the column on the right.
←
Moves to the column on the left.
↓ ↑
or , then Enter.
→
or turn Back Light off by
↓ ↑
or , then Enter.
↑
or , then Enter.
↑,
or then Enter.