Internal Options - Sun Microsystems SPARCserver 1000 Service Manual

1

1.1.8 Internal Options

Option Location
System board Card cage
SuperSPARC module System board
SIMMs System board
SBus cards System board
Drives in SCSI tray Chassis
Disk card Card cage
1. A system board with zero SPARC modules can be used for memory expansion and for additional SBus slots.
1-10
The system contains a card cage with space for up to four boards. Table 1-1
summarizes the internal options for the SPARCserver 1000 system.
Table 1-1 Internal Options
Quantity
1-4 per system
1-8 per system
0-16 per system board
0-12
Up to 4 half-height 3
1/2-inch disk drives
plus 2 additional
5 1/4-inch devices
0-3 per system
SPARCserver 1000 System Service Manual—June 1996
Comments
0-2 modules on each system board
System boards can have 0, 4, 8, 12, or 16 SIMMs.
installed. They are always installed in groups of 4.
SIMMs sizes are 8 or 32 MB DRAM or 1 MB NVRAM.
0-3 cards per system board.
Drives are numbered 0 to 3.
One SunCD (standard equipment) per system.
One tape device optional.
Each board contains 4 half-height, 3 1/2-inch SCSI-2
disk drives.
1
.