Configure Options - Sun Microsystems Enterprise Tape Library 7/3500 Field Service Manual

Configure Options
The Configure Options command enables you to set the following. (
Configure Options
TABLE A-1
Options Description
Library power-up Determines whether the library is online or in Standby mode when
state
powered up.
Auto clean Enables the library to perform drive cleaning tasks automatically
as needed.
Retries Causes the library to automatically retry a failed move command
before issuing an error message.
Exabyte emulation Causes the library to return the same inquiry string as the Exabyte
tape library.
Bar code scan Turns bar code scanning on or off during inventory.
Auto inventory Causes the library to perform an inventory whenever the library is
powered up.
Auto load Automatically moves any cartridge placed in the load port to an
empty storage bin.
TABLE A-1
Appendix A Control Panel Menus
)
171