Option Unl, Source Attenuators And Bias Tees; Cd-Rw Drive; Usb Hub; Option 0Bw, Printed Service Guide - Agilent Technologies E8362B Service Manual

General Product Information
Analyzer Options, Upgrades, and Accessories

Option UNL, Source Attenuators and Bias Tees

This option adds a 60-dB step attenuator and a bias tee between the switch splitter and
each of the ports. The step attenuators are used to adjust the power level to the device
under test (DUT) without changing the power in the reference path. The bias tees provide
a means of biasing active devices under test. DC bias for the bias tees is provided through
two rear-panel BNC connectors. These inputs are fused for protection.

CD-RW Drive

This accessory is an external read/write CD drive with a USB cable.
This accessory can be ordered as model number N4688A.

USB Hub

This accessory is a 4-port USB hub for connecting additional USB peripheral devices.
This accessory can be ordered as model number N4689A.

Option 0BW, Printed Service Guide

This option adds a printed copy of the assembly-level service guide (this manual).
This option is not available as an upgrade. It can be ordered as part number E8364-90026.

Option 1CP, Rack Mount Flange Kit for Instruments with Handles

Option 1CP provides a rack mount kit that contains a pair of flanges (cut to adapt to
handles), rack mount rails, and the necessary hardware to mount the analyzer in an
equipment rack with 482.6 mm (19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to
on page 6-59 for the part numbers.

Option 1CM, Rack Mount Flange Kit for Instruments without Handles

Option 1CM provides a rack mount kit that contains a pair of flanges, rack mount rails,
and the necessary hardware to mount the analyzer in an equipment rack with 482.6 mm
(19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to
on page 6-59 for the part numbers.
2-6
PNA Series Microwave Network Analyzers
E8362B, E8363B, E8364B
"Rack Mount Kits and Handle Kits"
"Rack Mount Kits and Handle Kits"
Service Guide E8364-90026