Organization Of Service Guide - Agilent Technologies E5061B Service Manual

Organization of Service Guide

Tabs are used to divide the major chapter and appendix of this manual. The contents of
each chapter and appendix in this manual is as follows;
Chapter 1 , "General Information,"
The Service Guide is a guide to servicing the E5061B RF Network Analyzer. The
guide contains information requisite to troubleshooting, and repairs.
Chapter 2 , "Troubleshooting,"
This chapter provides the procedure to isolate a faulty assembly in the E5061B.
Chapter 3 , "Replaceable Parts,"
This chapter contains information for ordering replacement parts for the E5061B.
Chapter 4 , "Replacement Procedure,"
This chapter provides procedure for removing and replacing the major assemblies in
the E5061B.
Chapter 5 , "Post-Repair Procedures,"
This chapter lists the procedures required to verify the E5061B operation after an
assembly is replaced with a new one.
Appendix A , "Manual Changes,"
This appendix contains the information required to adapt this manual to versions or
configurations of the E5061B manufactured earlier than the current printing date of
this manual. The information in this manual applies directly to E5061B units with the
serial number that is printed on the title page of this manual.
Appendix B , "System Recovery,"
This appendix describes how to recover the operating system (Windows XP) when
the operating system has been damaged.
Appendix C , "Firmware Update,"
This appendix describes how to update the E5061B firmware. When you want to
update the E5061B firmware, refer to this appendix.
Appendix D , "Power Requirement,"
Appendix E, "Messages,"
The E5061B can display error messages as well as messages that indicate the internal
operating status of the equipment. This appendix explains what these messages
mean. They are listed in alphabetical order.
Chapter 1
General Information
Organization of Service Guide
13