Section Number Setting; Facing Direction Of The Module Installation - Mitsubishi Electric AJ65VBTCU-68DAVN User Manual

4 SETUP AND PREPARATION BEFORE OPERATION

4.6 Section Number Setting

4.7 Facing Direction of the Module Installation

DIN rail
4 - 10
The station number setting of the AJ65VBTCU-68DAVN determines the buffer memory
addresses of the master module where the remote I/O signals and read/write data are
stored.
For details, refer to the user's manual of the master module used.
The AJ65VBTCU-68DAVN module may be installed in any of six orientations using a
DIN rail or CC-Link connector type fitting.
(There are no restrictions on the facing directions.)
Ceilling installation
Flat installation
Front installation
MELSEC-A
4 - 10