Hunt Group Or Ring Group Data Distribution Errors - Mitel MiVoice Business 3300 ICP Troubleshooting Manual

Symptom
When adding a new
element to a migrated
network, you receive
either of the following
error messages after
you initiate the Start
Sharing operation:
"Synchronization failed.
You must migrate this
node to the new data
model before attempting
to join the SDS network"
"Synchronization failed.
The target for this
operation must migrate
to the new model first".

8.6.2 Hunt Group or Ring Group Data Distribution Errors

Table 51: Troubleshooting Hunt Group or Ring Group Data Distribution Errors
Symptom
Data distribution alarm
is generated. Data
distribution errors
related to resilient hunt
groups or ring groups
are displayed in the
SDS Distribution Errors
form.
Document Version 1.0
Troubleshooting Guide
Possible Cause
You attempted to add a
non-migrated element to
the GDM network.
Possible Cause
Remote (secondary)
controller does not
support hunt group or
ring group resiliency.
The controller that
you have selected as
the secondary is not
running the required
software: Release
7 (or later) for hunt
group resiliency or
3300 Release 8.0 (or
later) for ring group
resiliency.
Corrective Action
Corrective Action
Install the required software on the
secondary controller, or select a
different controller that is running
the required software as the
secondary controller.Then, delete
the distribution error updates.
Voice Networking
262