Locating Resilient Hunt Groups - Mitel MiVoice Business 3300 ICP Troubleshooting Manual

Diagnosing Problems
• Obtaining the Status of Resilient Trunks

10.12.1 Locating Resilient Hunt Groups

Use the following maintenance commands to obtain information for resilient hunt groups:
• Locate Hunt Group <pilot number>
• Locate Feature Hunt Group <pilot number>
• Locate Remote <pilot number>
• Locate Extension <pilot number>
• Locate Feature Extension <pilot number>
The table below lists examples of the system outputs for these maintenance commands
when you issue them against a resilient hunt group.
Table 65: Locate Commands for Resilient Hunt Groups
Example
Input
locate hunt
group 4001
325
Example Output
Pilot Number: 4001
Primary Element: LEID 201 -
Routing Digits: 2905 *
Secondary Element: CEID
200 - Routing Digits 2904
on page 328
Meaning
Hunt group pilot number 4001 is a
resilient DN, located on primary ICP
with local element identifier (LEID)
201 and routing digits 2905.
The hunt group's secondary ICP has
CEID 200 and routing digits 2904.
LEID identifies the ICP that you
issued the command from. The
command was issued on the
primary ICP.
The * indicates the known location of
the hunt group.
Document Version 1.0
Troubleshooting Guide