Target Group - Mitel MX-ONE Installation Instruction

I B
NSTALLING OARDS AND
1
1.1
1.2
1.3
1.3.1
1.3.2
3
C
ABLING
INTRODUCTION
MX-ONE is a communication solution for enterprises. MX-ONE integrates voice
communication in fixed and mobile networks for public as well as private service.
MX-ONE can be integrated into an existing Local Area Network (LAN) infrastructure.
MX-ONE supports both IP telephony and functions found in classic circuit-switched
PBXes (Private Branch Exchanges).
SCOPE
This document describes the MX-ONE cabling and connection in a detailed way. It is
aimed for customers doing new installation. For other parts of the Installation see:
• Installation preparation and Earthing, 19/1531-ASP11301
• Installation Chassis in a Cabinet, 20/1531-ASP11301

TARGET GROUP

The target group for this document is personnel involved in installing the MX-ONE.
PREREQUISITES
This section lists requirements that must be fulfilled before the installation starts.
ELECTRICAL CONNECTIONS
Installation procedures involving connection of power cables, batteries and earthing
must be performed according to local regulations.
SAFETY
All personnel involved in installation must read and understand the safety instructions
prior to installation, see the description document for SAFETY.
21/1531-ASP11301 Uen C 2017-03-28