Common Audible Ringing (Ring Groups) - Mitel SX-5 Manual

SECTION MITL9103 -098-105-NA
Common Audible
Ringing (Ring Groups)
Description
The SX-5 allows incoming calls to ring more than one extension. if desired. Two
independent Ring Groups may be defined. one for each incoming trunk. Each Ring Group
may be defined differently for day and night service operation. An incoming trunk call
will ring the main extension (trunk 1 rings Ring Group 1 and trunk 2 rings Ring Group 2)
and after a specified delay will ring all the members of that Ring Group. When the
main extension is busy the incoming trunk call rings the auxiliary members im-
mediately.
Conditions
Defining the members of a Ring Group and its daylnight service selection may
be performed from the Control Extension at anytime, the system does not have
to be in the programming mode.
A maximum of two Ring Groups may be specified.
Only one extension per Ring Group may be defined as the main extension.
There are no restrictions on Ring Group membership.
If the main extension has Call Forwarding
-
Busy set the forwardee becomes
the temporary main extension of the group.
Feature Selection
To Define
the
Main Extension in a Ring Group:
Lift the Control Extension handset
-
dial tone is returned
Dial 33AB5X where:
A
=
1
if Ring Group 1 is to be defined
A
=
2 if Ring Group 2 is to be defined
B
=
3 if Day Service operation is to be defined
B
=
4 if Night Service operation is to be defined
X
=
the Equipment Number of the main extension in the ring group.
To Add Auxiliary Members to a Ring Group:
Lift the Control Extension handset
-
dial tone is returned
Dial 33AB6NX where:
A
=
1 if the extension is to be added to Ring Group 1
=
2 if the extension is to be added to Ring Group 2
B
=
3 if Day Service operation is to be defined
=
4 if Night Service operation is to be defined
N
8
the number of auxiliaries to be added (1-5)
X
=
the Equipment Numbers of the extensions to be added
To Remove an Auxiliary Member from a Ring Group:
Lift the Control Extension handset
-
dial tone is retwned
Dial 33AB7X where:
A
=
1 if the extension is to be removed from Ring Group
1
=
2 if the extension is to be removed from Ring Group 2
B =
3
if Day Service operation is to be defined
=
4 if Night Service operation is to be defined
X
=
the Equipment Number of the extension to be removed
Page
14