System Log Save Mode Settings; System Severity Settings - D-Link xStack User Manual

®
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Choose Enabled or Disabled to activate or deactivate.
Status
To set the System Log Server configuration, click Apply. To delete an entry from the System Log Server window, click the
corresponding under the Delete heading of the entry to delete. To return to the Current System Log Servers window, click the
Show All System Log Servers link.

System Log Save Mode Settings

This window may be used to choose a method for which to save the switch log to the flash memory on the Switch.
To view this window, click Administration > System Log > System Log Save Mode Settings, as shown below:
Figure 2 - 28 System Log Save Mode Settings window
Use the pull-down menu to choose the method for saving the switch log to the Flash memory. The user has three options:
Time Interval – Users who choose this method can configure a time interval by which the switch will save the log files, in the box
adjacent to this configuration field. The user may set a time between 1 and 65535 minutes. The default setting is one minute.
On Demand – Users who choose this method will only save log files when they manually tell the Switch to do so, using the Save
Services folder under the Save Changes link.
On Trigger – Users who choose this method will have log files saved to the Switch every time a log event occurs on the Switch.
The default setting is On Demand. Click Apply to save changes made. Click Save Log Now to immediately save log files
currently on the Switch.

System Severity Settings

The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the alert
triggers either a log entry or a trap message can be set as well. Use the System Severity Settings window to set the criteria for
alerts. The current settings are displayed below the System Severity Table.
To view this window, click Administration > System Severity Settings, as shown below:
Figure 2 - 29 System Severity Settings window
Use the drop-down menus to configure the parameters described below.
34