Snmp Linkchange Trap Settings - D-Link DGS-1510 Series Web Ui Reference Manual

Gigabit ethernet smartpro switch
Hide thumbs Also See for DGS-1510 Series:
Table of Contents

Advertisement

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
SNMP Global State
SNMP Response Broadcast
Request
SNMP UDP Port
Trap Source Interface
The fields that can be configured for Trap Settings are described below:
Parameter
Trap Global State
SNMP Authentication Trap
Port Link Up
Port Link Down
Coldstart
Warmstart
Click the Apply button to accept the changes made.

SNMP Linkchange Trap Settings

This window is used to configure the SNMP link change trap settings.
To view the following window, click Management > SNMP > SNMP Linkchange Trap Settings, as
shown below:
Select this option to enable or disable the SNMP feature.
Select this option to enable or disable the server to response to
broadcast SNMP GetRequest packets.
Enter the SNMP UDP port number.
Enter the interface whose IP address will be used as the source
address for sending the SNMP trap packet.
Description
Select this option to enable or disable the sending of all or specific
SNMP notifications.
Tick this option to control the sending of SNMP authentication failure
notifications. An authenticationFailuretrap is generated when the
device receives an SNMP message that is not properly authenticated.
The authentication method depends on the version of SNMP being
used. For SNMPv1 or SNMPv2c, authentication failure occurs if
packets are formed with an incorrect community string. For SNMPv3,
authentication failure occurs if packets are formed with an incorrect
SHA/MD5 authentication key.
Tick this option to control the sending of port link up notifications. A
linkup trap is generated when the device recognizes that one of the
communication links has come up.
Tick this option to control the sending of port link down notifications. A
linkDown trap is generated when the device recognizes a failure in one
of the communication links.
Tick this option to control the sending of SNMP coldStart notifications.
Tick this option to control the sending of SNMP warmStart
notifications.
36

Advertisement

Table of Contents
loading

Table of Contents