Show Rmon Events - D-Link DES-3010GA Cli Manual

D-Link DES-3010FA/GA CLI Reference Guide

show rmon events

The show rmon events User EXEC mode command displays the RMON event table.
Syntax
show rmon events
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON event table.
Console> show rmon events
Index Description
----- --------------
1 Errors
2 High Broadcast
The following table describes significant fields shown above:
Field De scr ip tio n
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event. Can have the following
values: none, log, trap, log-trap. In the case of log, an entry is made in the log table for
each event. In the case of trap, an SNMP trap is sent to one or more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community specified by this octet
string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not generated any events, this
value is zero.
Type Community
-------- ---------
Log
Log-Trap device
Page 193
Owner Last time sent
------- --------------------
CLI Jan 18 2002 23:58:17
Manager Jan 18 2002 23:59:48