Paper Jam Procedures For The Finisher Module; Paper Jams In The Finisher Module - Xerox Versant 80 Press User Manual

Fault Code Possible Cause
051-913, 051-914, Paper jam in the DFA device
051-915

Paper Jam Procedures for the Finisher Module

Paper Jams in the Finisher Module

For detailed instructions on clearing paper jams in the Finisher Module, refer to the
following procedures:
• Paper Jams in the Post-Process Inserter (Tray 8 / T1)
• Paper Jams at Finisher Top Tray
• Paper Jams at Finisher Stacker Tray
• For paper jams inside the Finisher Left Cover, refer to the following procedures:
- Paper Jams at Lever 1a and Knob 1c
- Paper Jams at Lever 1d
- Paper Jams at Lever 1b
• For paper jams inside the Finisher Right Cover, refer to the following procedures:
- Paper Jams at Lever 3b and 3d
- Paper Jams at Lever 3e and Knob 3c
- Paper Jams at Lever 3g and Knob 3f
- Paper Jams at Lever 4b and Knob 3a
• For paper jams at the optional C / Z Folder, refer to the following procedures:
- Paper Jams at Lever 2a and Knob 3a
- Paper Jams at Lever 2b and Knob 2c
- Paper Jams at 2c, 2e, 2f, and 2d
- Paper Jams in Areas 4b and 4c
• For Standard Stapler jams and faults, refer to the following procedures:
- Stapler Faults Overview
® ®
Xerox Versant 80 Press
User Guide
Standard Finisher Plus
Recommended Solution
1. Refer to the DFA device user
documentation and follow in-
structions on how to clear the
fault.
2. Set or change the profile value
(refer to the DFA user document-
ation).
3. Power Off / On the press and re-
send / rescan the job.
4. If the fault persists, contact the
Customer Support Center.
26-7