Reinserting The Basic Staple Cartridge - Xerox Versant 80 Press User Manual

Standard Finisher / Booklet Maker Finisher
6. While holding the tabs of a new staple cartridge, push it into the unit.
7. Push the staple cartridge unit to its original position in the machine.
8. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.

Reinserting the Basic Staple Cartridge

Use this procedure if the standard staple cartridge is inserted incorrectly into the machine.
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
24-28
® ®
Xerox Versant 80 Press
User Guide