Finisher Module; Finisher Module Main Components - Xerox Versant 80 Press User Manual

Standard Finisher Plus
2 Finishing Transport
The Finishing Transport serves as an interface to transfer paper from the Finisher
Module to the attached third-party output device. The Finishing Transport moves the
paper from the Finisher Module to one of the three Finishing Transport exits. The height
of the paper entry on the third-party, DFA device must align with the Finishing Transport
Exit 1 or Exit 2.

Finisher Module

Finisher Module Main Components

The Finisher Module includes the following components:
1 Finisher Module
Output prints are fed from the press through the required Interface Module or Interface
Cooling Module to the Finisher Module which then feeds the prints to the Finishing
Transport for delivery to a third-party output device.
The optional C / Z Folder is also shown in the illustration.
2 Post-process Inserter (Tray 8 / T1)
This tray is standard on the finisher and is used to load preprinted stock (SEF or LEF)
as separators and covers that will be inserted into the printed output. Paper loaded in
this tray is not printed on. The tray holds up to 200 sheets when using 20 lb. / 75 gsm
paper.
3 Punch Scrap Container
Collects the scraps from the puncher. Open to remove the scraps.
4 Standard Staple Cartridge
Contains staples. Remove this cartridge to replace staples and clear staple jams.
5 Staple Waste Container
Container for staple waste. Remove this container when full.
6 Top Tray
The Top Tray is used for stacked output and can receive up to 500 sheets of 20 lb. /
80 gsm paper. Prints are delivered here when specific output features are selected,
such as Automatic sorting, Collated, Uncollated or Normal.
7 Stacker (middle) Tray
The Stacker Tray is used for offset and/or stapled output. It holds up to 2,000 sheets
of 20 lb. / 80 gsm paper. This tray also receives prints when you punch and Z fold. As
an option, both the Top Tray and Stacker Tray can be used for hole punched output.
26-2
® ®
Xerox Versant 80 Press
User Guide