Information On User Display Panel - Xerox Versant 80 Press User Manual

GBC AdvancedPunch Pro
Backgage Depth Setting
Backgage is the amount of distance of the punched holes from the trail edge of the
sheet. This distance can be adjusted by pressing the Up or Down buttons on the User
Display Panel.
Pressing Up increases the Depth of Backgage, and pressing Down decreases the Depth
of Backgage.
1. Backgage
2. The minus sign ( - ) on the User Display Panel decreases the depth of the Backgage.
3. The plus sign ( + ) on the User Display Panel increases the depth of the Backgage.
Alignment Setting
Alignment is the distance of the Top punched hole from the side edge of the sheet
(viewed from the punch output orientation). This distance can be adjusted by pressing
Up or Down buttons on the User Display Panel.
Pressing Up increases the Alignment position, and pressing Down decreases the
Alignment position.
1. Alignment
2. The plus sign ( + ) on the User Display Panel increases the Alignment offset.
3. The minus sign ( - ) on the User Display Panel decreases the Alignment offset.
Language
The User Display Panel can be configured to display the desired language. Language
sets available include English, French, Spanish, German, or Italian.
Units
Use this setting to select either inches or millimeters (mm).

Information on User Display Panel

The following type of information is shown on the User Display Panel when necessary:
Punch Cycles
This is the total number of punched sheets the system has processed.
Die Cycles
This is the total number of sheets punched with the currently installed die-set.
22-6
® ®
Xerox Versant 80 Press
User Guide