Standard Finisher / Booklet Maker Finisher
4. Move the lever 1b to the original position.
5. Close the finisher left cover completely.
Note
The machine will not operate if the cover is open even slightly.
Paper Jams at Lever 3b and 3d
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Move the levers 3b and 3d; remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the levers 3b and 3d to their original positions.
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
24-18
®
®
Xerox
Versant
80 Press
User Guide