Internal Spectrophotometer (Interface Cooling Module) - Xerox Versant 80 Press User Manual

Interface Module / Interface Cooling Module

Internal Spectrophotometer (Interface Cooling Module)

The Interface Cooling Module is equipped with an internal spectrophotometer. This
internal spectrophotometer is sometimes referred to as an Inline Sensor (ILS). The
internal spectrophotometer provides the customer with an internal calibration tool that
works with your print server to provide unique calibration and profiling capabilities, which
include the following:
• The ability to calibrate the press from the print server without manually feeding
calibration charts (also known as calibration targets); this is a semi-automated process:
- It is initiated by the operator
- It scans and measures targets automatically without an external
spectrophotometer
- It resets color tables to original values to maintain consistent color
• Operators can create destination or output profiles without having to scan targets
with an external spectrophotometer:
- The digital press prints color targets while the internal spectrophotometer
measures them
- The system then develops a map so that output colors can be produced that
accurately replicate a known standard such as GRACoL or SWAP
- The mapping is written into the profile for the type of media and line screening
used
Tip
These calibration and profiling capabilities are applicable to any associated print server,
including the EX Print Server and FreeFlow Print Server.
Note
The Interface Cooling Module equipment complies with international safety standards
and is certified as a Class 1 Laser Product. With specific regard to lasers, the equipment
complies with laser product performance standards as set by governmental, national,
and international agencies as a Class 1 Laser Product. It does not emit hazardous light,
as the beams are totally enclosed during all phases of customer operation and
maintenance.
20-4
® ®
Xerox Versant 80 Press
User Guide