Standard Finisher / Booklet Maker Finisher
3. When this button is pressed and the upward curl indicator is lit, upward curl correction
is performed on all printed output. If your output is curled upward, press this button
to prevent upward curls.
Note
When no indicator is lit, the press does not perform any curl correction to the printed
output.
Folding Feature on the Finisher
Folding Overview
If your press is equipped with the Booklet Maker Finisher and / or the C / Z Folder, you
can make prints using the folding option. The option folds your prints in half (single or
bi-folding) or in thirds (C-fold or Z-fold types). The folding option is selected from the
print driver.
Note
In order to use the folding option, the orientation of documents must be short-edge
feed (SEF). You must select a paper tray that contains SEF stock.
Fold Types
Important
The Single Fold (Bi-Fold) option is available only with the Booklet Maker Finisher. The
C-Fold and Z-Fold options are available only with the C / Z Folder.
These fold types are available:
Single Fold (Bi-Fold)
A Bi-Fold has one fold which creates two panels to the output.
There are three Bi-Fold options available:
• Bi-Fold Single Sheet
• Bi-Fold Multiple Sheets
• Bi-Fold Multiple Sheets Stapled
C-Fold
A C-Fold has two folds which creates a three-panel output.
24-4
®
®
Xerox
Versant
80 Press
User Guide