1. Manuals
  2. Brands
  3. Xerox Manuals
  4. All in One Printer
  5. DocuColor 7002
  6. User manual

Xerox DocuColor 7002 User Manual

Hide thumbs Also See for DocuColor 7002:
Table of Contents

Advertisement

Quick Links

Download this manual
Version 1.0
August 2009
®
DocuColor
7002/8002
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Xerox DocuColor 7002

Summary of Contents for Xerox DocuColor 7002

  • Page 1 Version 1.0 August 2009 ® DocuColor 7002/8002 User Guide...
  • Page 2 ©2009 Xerox Corporation. All rights reserved. Xerox®, and the sphere of connectivity design, and DocuColor are trademarks of Xerox Corporation in the United States and/or other countries. Document Binder 120D™ is a trademark of Bindomatic®. Horizon ColorWorks™, Horizon ColorWorks PRO™ Document Finishers, and Horizon Perfect Binder BQ-280x™ are trademarks of Horizon, Interntaional.

  • Page 3: Table Of Contents

    Table of Contents User Guide ............1-1 Machine Introduction .
  • Page 4 Table of Contents DocuColor 7002/8002 Top Tray ............. . 8-2 Stacker Tray/Cart .
  • Page 5 DocuColor 7002/8002 Table of Contents Weight conversion ranges ..........11-5 High Capacity Stacker 80 Specifications .
  • Page 6 Table of Contents DocuColor 7002/8002 User Guide...

  • Page 7: User Guide

    Machine Introduction Machine Introduction The DocuColor 7002/8002 is a full color/black and white digital press operating at a speed of eighty prints per minute. This chapter provides the location, name, and function of the various digital press components including: •...

  • Page 8: Major Components

    DocuColor 7002/8002 Major Components Number Part Description On/Off Press the Power Switch to the On position to power on the digital press. A screen message advises of a short wait while the Fuser warms up and the digital press runs a system check.

  • Page 9: User Interface (Ui)

    DocuColor 7002/8002 User Interface (UI) The User Interface (UI) displays messages that indicate the status of the digital press during idle, run, or fault conditions. 1. Touch Screen 2. Control Panel Touch Screen Number Part Description The message area at the top of the UI displays messages...

  • Page 10: Control Panel

    DocuColor 7002/8002 Control Panel Keypad Use the numeric keypad to enter your password for access to Tools Mode. Use the keypad for certain Tools Mode features. The keypad is also used by the service representative in the diagnostics mode. User Guide...
  • Page 11 DocuColor 7002/8002 Your digital press has one of two Control Panels: a Control Panel with words or one with international symbols. See the following for button functions. Power Saver Lights up when the digital press is in Sleep Mode. Press to return to Standby Mode.

  • Page 12: Internal Spectrophotometer

    DocuColor 7002/8002 Internal Spectrophotometer Your digital press includes an internal Spectrophotometer, which is located in area 8A of the Exit Module. The internal Spectrophotometer is sometimes referred to as the “Inline Sensor” (ILS). The internal Spectrophotometer provides the customer with an internal calibration internal tool that ensures the digital press is ready to print colors.

  • Page 13: Job Management

    DocuColor 7002/8002 Job Management Job Status When you press the Job Status button, the Job Status screen is displayed. The Job Status screen includes Job Type, Current Status, Paper Size, Output Quantity (refers to the output in sheets for a single page job and in sets or stacks for a multiple page job), and total Number of Pages.

  • Page 14: Optional Accessories

    DocuColor 7002/8002 Optional accessories Optional feeding accessories Where to find Feeding accessory Description information Trays 3 and 4 (Second Feeder Module)) The two-tray Second Feeder Information on Trays 2 Module (SFM), also referred and 4) can be found in this to as Trays 3 and 4, provides user guide.
  • Page 15 Optional Accessories • Basic Troubleshooting • Specifications • Appendix Xerox Document Binder 120-D (DB120- The Document Binder 120-D Information on the ™ is a third-party, Document Document Binder 120-D Finishing Architecture (DFA) can be found in the device that uses a unique...
  • Page 16 DC-645 Slitter-Cutter- party device that provides: Creaser can be found in the Finishing Solutions • Cutting and creasing Guide; contact your Xerox operations in a single sales representative for pass, plus it has the more information. unique Duplo feature of...
  • Page 17 BQ-270xis a third-party Horizon Perfect Binder BQ- device that provides: 270x can be found in the Finishing Solutions • High-quality production Guide; contact your Xerox perfect binding with sales representative for fully automated more information.. operation and push- button simplicity.
  • Page 18 DocuColor 7002/8002 1-12 User Guide...

  • Page 19: Where To Find Help

    Where to Find Help 1-800 Telephone numbers For system support, user help, and service support, call the appropriate number: US: 1-800-821-2797 (Includes TTY Support) Canada: 1-800-939-3769 Xerox also provides web-based customer support. Go to: www.xerox.com/eSupportCentre User Guide...

  • Page 20: How To Find The Machine Serial Number

    Where to Find Help DocuColor 7002/8002 How to find the machine serial number You can find the serial number two places: 1. Press the Machine Status button on the Control Panel and then press the Machine Details tab, or 2. Open the front doors to locate the serial number plate on the frame.

  • Page 21: How To Read The Billing Meters

    DocuColor 7002/8002 Where to Find Help How to read the Billing Meters 1. Press the Machine Status button on the Control Panel. 2. Press the Machine Details Tab. 3. Press the Meters button. User Guide...

  • Page 22: Reference Documents

    Where to Find Help DocuColor 7002/8002 Reference Documents There are additional reference documents available to you that provide more detailed information. Refer to the list below for the title, description and the location of the document. Document Description Location System Administration Guide...

  • Page 23: Loading Paper

    Loading Paper Loading paper (Trays 1-4) 1. Lift the handle and pull out the paper tray. 2. Select the appropriate paper stock for your print job. 3. Open the ream of paper seam side up and place it in the tray. User Guide...
  • Page 24 Loading Paper DocuColor 7002/8002 4. Place the paper in the front right corner of the tray. 5. Do Not exceed the “Max” fill line. 6. Squeeze the green levers, and slide the Paper Guides until they touch the side of the paper.
  • Page 25 DocuColor 7002/8002 Loading Paper Non-standard size paper is any paper for which there is no paper guide setting within the minimum and maximum sizes for the trays: 7.16 to 12.6 inch Long Edge Feed (LEF) or 7.16 to 19.2 inch SEF (182 - 320 mm LEF or 182 x 488 mm Short Edge Feed (SEF)

  • Page 26: Paper Tray Guidelines

    Loading Paper DocuColor 7002/8002 10. Select the position of the Paper Tray Blowers to match the weight of the paper stock in the tray. 11. Slide the tray back into the machine until it locks into place. Paper Tray Guidelines For best results, remember the following: •...

  • Page 27: How To Clear Jams

    How to Clear Jams Printer jam clearance If a jam occurs, the digital press stops printing and a message is displayed on the User Interface (UI). Follow all instructions displayed completely and in sequence. Refer to this chapter for additional information to resolve the problem. If power is interrupted during the printing process, it is imperative that you clear areas behind the Right and Left Front Doors last.

  • Page 28: Upper Transport Area

    How to Clear Jams DocuColor 7002/8002 Upper Transport Area Jams occur in this area only when the Second Feeder Module containing Trays 3 and 4 is connected. 1. Pull out the Transport Area drawer above Tray 1. 2. Lift up the handle.

  • Page 29: Transport Module

    DocuColor 7002/8002 How to Clear Jams Transport Module Note Refer to the video located on the Customer Documentation CD as needed. Open the areas in the Transport Module indicated on the UI. Carefully remove all jammed paper. 1. Open the Transport Module door.

  • Page 30: Exit Module

    How to Clear Jams DocuColor 7002/8002 Exit Module Note Refer to the video located on the Customer Documentation CD as needed. Follow the instructions on the UI to clear jams from all the areas indicated in the Exit Module. Follow the instructions on the UI to restart your print job.

  • Page 31: Right/Left Door Paper Path

    DocuColor 7002/8002 How to Clear Jams Right/Left Door Paper Path WARNING Be careful when clearing jams in the Fuser Area. The Fuser is extremely hot and will cause injury. Note Refer to the video located on the Customer Documentation CD as needed.
  • Page 32 Occasionally a sheet of paper wraps around the heat roll. (The heat roll is visible when handle 4d is up). DO NOT attempt to remove this sheet of paper because the stripper fingers may be damaged if you attempt this procedure. Call your Xerox service representative to remove this piece of paper.

  • Page 33: Jam Clearance With 2-Sided Printing

    DocuColor 7002/8002 How to Clear Jams Jam Clearance with 2-Sided Printing When printing 2-Sided output, the UI will direct you to clear the following areas if a jam occurs. 1. Open the Right and Left Front Doors when directed to by a UI message.

  • Page 34: High Capacity Stacker 80 (Hcs80)

    How to Clear Jams DocuColor 7002/8002 High Capacity Stacker 80 (HCS80) A paper jam in the HCS80 will be indicated by a message on the digital press UI. Follow the instructions displayed. The image on the HCS80 Control Panel will flash showing the area where the jam is located.

  • Page 35: High Capacity Stacker/Stapler (Hcss) And Commn Stacker/Stapler (Css)

    DocuColor 7002/8002 How to Clear Jams High Capacity Stacker/Stapler (HCSS) and Commn Stacker/Stapler (CSS) A paper jam in the finishers is indicated by a message on the digital press Touch Screen. The finisher Control Panel display illuminates the area where the jam has occurred.
  • Page 36 How to Clear Jams DocuColor 7002/8002 4-10 User Guide...

  • Page 37: How To Adjust Paper Curl

    How to adjust Paper Curl Paper Curl When paper is exposed to heat, the paper loses moisture and curls toward the heat source. High coverage jobs tend to curl more due to the toner plastification effect on the paper surface. The system tries to reduce this by using mechanical devices within the paper path called decurlers.

  • Page 38: Tool Mode

    How to adjust Paper Curl DocuColor 7002/8002 Tool Mode 1. To enter Tools Mode, press the Access button on the Control Panel. The Access Password Screen appears. 2. Use the keypad to enter your password. 3. Press the Enter button.
  • Page 39 8. Select a different setting (A-D) and run the job again. Some experimentation may be needed to find the correct setting. Note If you are not able to find an acceptable setting that minimizes curl, refer to the document entitled DocuColor 7002/8002 Decurler Adjustment. User Guide...
  • Page 40 How to adjust Paper Curl DocuColor 7002/8002 User Guide...

  • Page 41: How To Run Tabs

    How to Run Tabs Tabs Tabbed Inserts can be loaded into the paper trays as Non-Standard paper. 1. Load 9 X 11 inch tab stock (228 x 279 mm) in the paper tray with the tabs with the short edge of the tabs in the lead edge position. Note If a jam ocurrs, there is no recovery procedure.
  • Page 42 How to Run Tabs DocuColor 7002/8002 3. Press the button to select Non Standard or Standard at the front of the tray. The green light will indicate your selection. Standard Non-standard 4. Press the button to select Coated or Uncoated. The green light will indicate your selection.
  • Page 43 DocuColor 7002/8002 How to Run Tabs 6. Use the keypad to enter your password. 7. Press the Enter button. 8. Press the Tools Pathway button to enter the Tools Mode. 9. Press the Non-Standard Paper Size button. User Guide...
  • Page 44 How to Run Tabs DocuColor 7002/8002 10. Select the appropriate Paper Tray and enter 11 in the X Axis box and 9 in the Y Axis box by using the up and down arrow buttons. 11. Run the tab job.

  • Page 45: Productivity Settings

    Productivity Settings Overview The productivity of the digital press relates to the continuous speed of the media output as measured in prints per minute (ppm). The continuous speed is dependent on paper size, paper weight, and fuser temperature. Use this productivity setting to optimize the throughput speed for the type of paper you run most frequently.

  • Page 46: Changing The Productivity Setting

    Productivity Settings DocuColor 7002/8002 Changing the Productivity Setting 1. Enter Tools Mode: Press the Access button on the Control Panel. The Access Password Screen appears. 2. Use the keypad to enter your password. 3. Press the Enter button. 4. Press the Tools Pathway button to enter the Tools Mode.
  • Page 47 DocuColor 7002/8002 Productivity Settings 6. Select the desired productivity setting. 7. Select Close. All jobs will run at the selected productivity setting until changed in Tools Mode. User Guide...
  • Page 48 Productivity Settings DocuColor 7002/8002 User Guide...

  • Page 49: Optional Accessories

    Optional Accessories The accessories included in this module are: • Paper Trays 3 and 4 • High Capacity Stacker 80 (HCS80) • High Capacity Stacker Stapler 80 (HCSS80)/Common Stacker Stapler (CSS) Trays 3 and 4 (Second Feeder Module) Tray 3 Tray 4 The Second Feeder Module (SFM) is an optional feeding device that contains Trays 3 and 4.

  • Page 50: High Capacity Stacker 80 (Hcs80)

    Optional Accessories DocuColor 7002/8002 High Capacity Stacker 80 (HCS80) Control Panel Top Tray Bypass Stacker Tray/Cart The HCS80 is an optional finishing device that provides stacking and offsetting capabilities for output to a Stacker Tray. The HCS80 connects to the right side of the digital press replaces the Offset Catch Tray (OCT).

  • Page 51: Identifying The Parts

    DocuColor 7002/8002 Optional Accessories Identifying the parts 3 4 5 1 Ready light The Ready light blinks during initialization and is constant when the HCS80 is in use or in standby mode. 2 Sample set button Press to have the HCS80 deliver the next collated set to the top tray.

  • Page 52: Hcs80 Cooling Fan

    Optional Accessories DocuColor 7002/8002 HCS80 Cooling fan The HCS80 is equipped with a cooling fan that you can switch on and off as required. The cooling fan is located inside the front door: Only switch on the cooling fan when running paper that weighs 120 g/m (80 lb.) or greater.
  • Page 53 DocuColor 7002/8002 Optional Accessories 2. Open the front door when the Unload Light illuminates. 3. Position the securing bar on top of the stacked paper. 4. Pull the Stacker Cart straight out. Remove the securing bar. 5. Remove the paper from the Stacker Tray.

  • Page 54: Hcss80/Css

    Optional Accessories DocuColor 7002/8002 HCSS80/CSS The HCSS80 and CSS are optional finishing devices (referred to as finishers) that provide stacking with offset and single or dual stapling output capabilities. The finishers must be connected to the right end of the digital press, replacing the Offset Catch Tray.

  • Page 55: Hcss80/Css Control Panel

    The Staple Indicator blinks when the staple level in the stapler is low. The Staple Indicator is constant when the stapler is empty. 3 Keypad The keypad, including the C button, is used only by the Xerox service representative. 4 Message Display Shows the fault codes.

  • Page 56: Hcs80/Css Operation

    Optional Accessories DocuColor 7002/8002 HCS80/CSS Operation Some important tips to remember: • The finishers cannot staple jobs with mixed sizes of paper. • The stacking may be skewed on the output from mixed-size paper jobs. • Only remove paper jams at the area indicated on the finisher Control Panel. Do not remove paper from any other areas of the paper path.

  • Page 57: Loading Staples In The Hcs80/Css

    DocuColor 7002/8002 Optional Accessories Loading Staples in the HCS80/CSS 1. Open the front door. 2. Push the yellow lever down with your left hand. 3. Grasp the grey handle on the cartridge unit and pull it towards you until it stops. Release the yellow level and the unit will lock into place.
  • Page 58 Optional Accessories DocuColor 7002/8002 5. Insert a new cartridge into the unit until you hear it click into place. 6. Push the Cartridge in to the Stapler Unit. 7. Push the yellow lever down and the cartridge unit automatically swings back into place.

  • Page 59: Undocking The Stacker Stapler

    DocuColor 7002/8002 Optional Accessories Undocking the Stacker Stapler 1. Open the Front Door of the Stacker Stapler 2. Pull the lever toward you and hold it in position while moving the stacker/stapler a small distance (25.4mm, 1in.) away from the press. Release the lever and continue to move the stacker/stapler as far as required.
  • Page 60 Optional Accessories DocuColor 7002/8002 8-12 User Guide...

  • Page 61: Maintenance

    Maintenance Cleaning the Digital Press Note Refer to the video located on the Customer Documentation CD as needed. CAUTION • Do NOT use any other cleaners or solvents on the digital press as they may interact with the paint on the covers, eventually causing the paint to peel. •...

  • Page 62: Cleaning The Corotrons

    If any problems occur while cleaning the pad or re-seating the wand, and/or if the above screen is continually displayed, call your Xerox service representative for assistance. 2. After the corotrons are cleaned, follow the prompts on the UI to record the activity.
  • Page 63 DocuColor 7002/8002 Maintenance 3. Once all the Corotron Cleaning Wands are properly seated in the corotron assembly, the User Interface displays the Interlock Open screen. Close the Front Doors. 4. After all the corotrons are cleaned and the front doors are closed, the Maintenance Charge Corotron screen is displayed.
  • Page 64 Maintenance DocuColor 7002/8002 5. Select the Cleaning button. 6. Select Yes. Note After incrementing the counter for a specific Corotron(s), it is no longer selectable. 7. Select the Close button to finish the cleaning procedure. User Guide...

  • Page 65: Cleaning The Paper Transport And Fusing Areas

    Fuser to cool for 15 minutes. 1. Open the Front Doors and pull out the Paper Transport Drawer using handle 4. 2. Clean the chute area with a lint-free cloth that was supplied with the digital press (Xerox Part Number: 19K03610).

  • Page 66: Replacing Consumable Supplies

    Rotate the belts from left to right as you continue to wipe them. Use the cloth to rotate them as using your hands could leave grease or dirt and create paper jams. 4. Clean the sensors with a lint-free cloth that was supplied with the digital press (Xerox Part Number: 19K03610).
  • Page 67 DocuColor 7002/8002 Maintenance 3. Remove and dispose of the empty cartridge. Note Before installing a new cartridge, vigorously shake the cartridge to ensure that the material is not compacted. 4. To install the new cartridge, insert it into the compartment with the arrow at the top and push in as far as it will go.

  • Page 68: Adding Fuser Oil

    Maintenance DocuColor 7002/8002 Adding Fuser Oil Add Fuser Oil when the “Add Fuser Oil” message is displayed on the UI. Note Refer to the video located on the Customer Documentation CD as needed. 1. Open the Right Front Door and place a drop cloth on the floor.

  • Page 69: Changing The Waste Dry Ink Bottle

    DocuColor 7002/8002 Maintenance Changing the Waste Dry Ink Bottle Change the Waste Bottle when the “Change Waste Bottle” message is displayed on the UI. Note Refer to the video located on the Customer Documentation CD as needed. The waste bottle is located inside a lower rear compartment of the Exit Module.

  • Page 70: Which Charge Corotron To Replace

    Maintenance DocuColor 7002/8002 Which charge corotron to replace If you notice streaks or bands of color across prints, a charge corotron unit may need to be replaced. To determine which unit needs replacing, retrieve and print the file named Corotron Test.pdf from the Customer Documentation CD.

  • Page 71: Corotron Replacement

    DocuColor 7002/8002 Maintenance Corotron Replacement Note Refer to the video located on the Customer Documentation CD as needed. 1. Open the front doors. 2. Squeeze the corotron handle and slowly pull the corotron completely out of the machine. 3. Dispose of the corotron according to local regulations.

  • Page 72: Replacing The Fuser Web

    Maintenance DocuColor 7002/8002 Replacing the Fuser Web Note Refer to the video located on the Customer Documentation CD as needed. There are two messages for the Fuser Web: • Web is near empty (can continue to use machine) • Web is empty (must replace).
  • Page 73 DocuColor 7002/8002 Maintenance 4. Lower and pull out the Fuser Web. Dispose of the web according to local regulations. 5. Align the yellow tabs on the sides of the Fuser Web with the yellow marker on each rail and slide the web all the way into the fuser.

  • Page 74: Consumable Supplies

    Maintenance DocuColor 7002/8002 Consumable Supplies The following items are consumables for the DocuColor 7002/8002. It is recommended that you have a supply of these items available to eliminate downtime when they need to be replaced. Supply Unit Supply Supply Shipped...

  • Page 75: Basic Troubleshooting

    The serial number label is in the center of the bottom frame of the digital press. The charts on the following pages lists problems and suggested solutions that apply to your digital press. If the problem persists after following all instructions, call your Xerox representative. Note...
  • Page 76 Basic Troubleshooting DocuColor 7002/8002 Problem Suggested Solutions The digital press does not • Ensure the power cord is plugged into the receptacle power on. correctly. • Ensure the power switch inside the front left door is set to the ON position.
  • Page 77 (152 mm) from the lead edge and is approximately two inches (50 mm) wide. Note If this defect occurs, return the Productivity Setting to the Single Paper Weight setting. If the defect still occurs after running another print, call your Xerox service representative for further assistance. User Guide 10-3...

  • Page 78: Printer Fault Codes

    4. If possible, use a phone near the press when calling for assistance. For system support, user help, and service support, call the appropriate number: US: 1-800-821-2797 (Includes TTY Support) Canada: 1-800-939-3769 Xerox also provides web-based customer support. Go to: www.xerox.com/eSupportCentre 10-4 User Guide...

  • Page 79: Hcs80 Troubleshooting

    DocuColor 7002/8002 Basic Troubleshooting HCS80 Troubleshooting If, after following the recommended solutions, the problem persists, call for assistance. The Fault Codes described below appear on the HCS80 display panel. Fault Code Cause Solution 212 100 PaperJam • A jam occurred during feeding.

  • Page 80: Loss Of Power

    Basic Troubleshooting DocuColor 7002/8002 Loss of Power Problem Solution If power is interrupted to • Ensure the power cord is plugged in to the proper wall receptacle the finisher • Ensure that the digital press power is “On.” • Ensure that the Ground Fault Indicator is in the On position •...
  • Page 81 DocuColor 7002/8002 Basic Troubleshooting Problem Cause Solution Fault Code 112-130 Paper is jammed • Open the finisher door. Jam indicated in between the • If no jammed paper is visible in the area finisher. Exit Module and the indicated, open the Exit Module door and finisher sensors.
  • Page 82 Basic Troubleshooting DocuColor 7002/8002 10-8 User Guide...

  • Page 83: Specifications

    Specifications This chapter provides specifications for the printer and optional accessories. Printer Specifications Paper specifications Paper All Paper Trays Minimum Paper Size 182mm x 182mm (7.16 x 7.16”) Maximum Paper Size 320mm x 488mm(12.6 x 19.2”) Standard Sizes • B5 LEF/SEF •...

  • Page 84: Duplexing

    Use only the transparencies recommended. Transparencies can be run from all the paper trays. • Xerox Removable Paper Stripe: USA and Canada, 3R5765; Xerox Europe, 3R93179. • Load transparencies into a tray with the paper stripe side facing DOWN and with the stripe as the leading edge.

  • Page 85: Simplex Print Jobs

    DocuColor 7002/8002 Specifications Simplex Print Jobs Rear of paper tray Paper tray Right side guides Front of paper tray Load the drilled paper into any tray in the Long Edge Feed (LEF) direction. Refer to the illustra- tion on the left.

  • Page 86: Paper Weight Conversion Tables

    Specifications DocuColor 7002/8002 Paper weight conversion tables Xerographic Bond, Offset, Text, Cover, Bristol and Tag, Index, pounds Grammage Writing, Book, pounds pounds pounds pounds 25.5 x 30.5” - 25 x 38”- 500 20 x 26” -500 22.5 x 28.5” - 500 sheets 17 x 22”...

  • Page 87: Weight Conversion Ranges

    DocuColor 7002/8002 Specifications Weight conversion ranges Xerographic Offset, Text, Index, Bristol and Bond, Writing, Cover, pounds Book, pounds pounds Tag, pounds Grammage pounds 20 x 26: - 500 (g/m 25 x 38” - 500 25.5 x 30.5” - 22.5 x 28.5” - 17 x 22”...

  • Page 88: Hcs80 Paper Guidelines

    Uncoated: Xerox Digital Color Xpressions+, 90 g/m , 24 lbs. In Europe, Xerox Digital Color Colotech+ 90 g/m • Coated: Xerox Digital Color Gloss Coated Text (120 g/m /80 lbs.) In Europe, Xerox Digital Color Colotech + Gloss Coated 120 g/m 11-6...

  • Page 89: Hcs80 Paper Destination Specifications

    DocuColor 7002/8002 Specifications HCS80 Paper Destination Specifications Paper Size Output Industry Inches Orientation Stacker Tray Bypass Top Tray Designation 60 - 300g/m 60 - 300 g/m 60 - 300 g/m 7.2 x 10.1 7.2 x 10.1 8.3 x 11.7 Letter 8.5 x 11...

  • Page 90: Hcss And Css Specifications

    Specifications DocuColor 7002/8002 HCSS and CSS Specifications Electrical / Environmental Requirements Western Hemisphere: 115 VAC, 15 amp, for 60 Hz. and 220 VAC, 10 amp for 50 Hz installations. Europe: 200-240 Volt 10 amp 50 Hz service outlet. The finisher requires a separate power source from the digital press.

  • Page 91: Paper Stock Specifications

    DocuColor 7002/8002 Specifications Paper Stock Specifications The Top Tray accepts all media types, sizes, and weights supported by the digital press. The Stack Tray accepts all standard media sizes supported by the digital press with the exception of sizes greater than A3/11 x 17 in.

  • Page 92: Paper Specifications For Stapling

    Specifications DocuColor 7002/8002 Paper Specifications for Stapling The following chart shows the stapling details for paper size, orientation, destination, and staple position. Numbers have been rounded up or down. Staple Positions marked with an "O" may be selected in the posi- tion indicated.
  • Page 93 DocuColor 7002/8002 Specifications 10.5 x Kai 8 15.3 (267 x 388) Asian market size 10.5 x Kai 16 (267 x 194) Asian market size Note Stapled sets of large paper (A3, 11 x 17in. and greater) may stack slightly skewed. The stapled sets will be of high quality.

  • Page 94: Staple Positions

    Specifications DocuColor 7002/8002 Staple Positions Staple Position 1 Staple Position 2 Dual Staple Size: (Front Corner) (Rear Corner) Inches (mm) 7.2x 10.1 JIS B5 (182x 257) 8x10 (203x 254) 8x5x11 (216x 279) 8.5x13 (216x 330) 8.5x14 (216x 356) 10.1x 14.3...

  • Page 95: Stapling Capacity For Different Paper Types And Weights

    DocuColor 7002/8002 Specifications Staple Position 1 Staple Position 2 Dual Staple Size: (Front Corner) (Rear Corner) Inches (mm) 11x17 (279x 432) 12x18 (305x 457) 12.6x 17.7 (320x 450) Stapling capacity for different paper types and weights Following is the staple capacity for various types and weights of paper.
  • Page 96 Specifications DocuColor 7002/8002 11-14 User Guide...

  • Page 97: Appendix

    Appendix This appendix contains supplemental detailed information. Refer to this information as required or when directed from previous chapters in the User Guide. Machine Details This screen provides the telephone number to call for support, the machine serial number and access to the meter counts.

  • Page 98: Maintenance Tab

    DocuColor 7002/8002 To reset the meters to zero, touch the Resettable Meters button. On the following screen touch the Reset button. Maintenance tab Touch the Customer Replaceable Unit button on the Maintenance screen to display a list of replaceable items and their status.
  • Page 99 DocuColor 7002/8002 The Customer Replaceable Unit screen displays a gauge or a check mark indicating the level at which the consumable is. For example, the gauges for the dry ink/toner cartridges indicate the amount of toner in each cartridge: •...

  • Page 100: Help

    DocuColor 7002/8002 Your Xerox service representative uses the Service Engineer Replaceable Unit function to check on the status items that are replaced only by the service engineer. These items include the fuser oil and the second bias transfer belt. Help Press Help for an overview of the different options displayed in the various tabs on the UI.

  • Page 101: Alert Screens

    DocuColor 7002/8002 Alert Screens An Alert screen has a red bar across the screen when a consumable product, such as Dry Ink/ Toner, needs to be replaced. An Alert screen also indicates that the digital press is unable to make prints because of a fault condition. Follow the instructions on the UI to resolve the problem and resume printing.

  • Page 102: Environmental Requirements

    DocuColor 7002/8002 Environmental Requirements The DocuColor 7002/8002 will enter the Power Saver mode after 15 minutes of no activity on the machine. The factory default time of 15 minutes can be changed in the Tools Mode. Ambient Temperature and Humidity •...

  • Page 103: Throughput

    DocuColor 7002/8002 Throughput All paper trays: Type: Coated or uncoated paper, transparencies Sizes: • Minimum = 182mm x 182mm (7.16 x 7.16”) • Maximum = 320mm W, 488mm L (12.6 x 19.2”) Weights: 60g/m to 300g/m Size/Loading Orientation: • B5 SEF/LEF •...
  • Page 104 DocuColor 7002/8002 The following charts illustrate the print speeds for the three modes using 8.5x11” or A4 paper fed LEF: DocuColor 7002 DocuColor 7002 All Weights Rated Substrate Single Paper Weight Mixed Paper Weight Speed 1 Sided 2 Sided 1 Sided...

  • Page 105: Physical Characteristics

    DocuColor 7002/8002 Physical Characteristics Digital Press Size Basic configuration of First Feeder Module, Digital Press with Exit Module, and Offset Catch Tray is 114.8 inches/2916 mm (W) x 43.5 inches/1105 mm (D) x 55.6 inches /1413 mm (H). Digital Press Weight...
  • Page 106 DocuColor 7002/8002 12-10 User Guide...

This manual is also suitable for:

Docucolor 8002

Table of Contents