Paper Jams In The Bypass (Tray 5); Paper Jams In The Standalone Bypass (Tray 5); Paper Jams When The Bypass Is Installed On Trays 6 And 7 - Xerox Versant 80 Press User Manual

Press Problem Solving

Paper Jams in the Bypass (Tray 5)

Paper Jams in the Standalone Bypass (Tray 5)

Important
Use this procedure to clear paper jams in the Bypass (Tray 5) when it is a standalone
feeding device and is not installed on any optional feeder (such as the Oversized High
Capacity Feeder).
Tip
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any copy/print jobs.
1. Remove the jammed paper and any paper that is loaded from the Bypass tray.
Note
If paper is torn, check inside the machine and remove it.
2. Open the Bypass Top Cover and remove jammed paper.
3. Close the cover.
4. Reload paper into the tray and resume copying / printing.

Paper Jams When the Bypass is Installed on Trays 6 and 7

Tip
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
14-42
® ®
Xerox Versant 80 Press
User Guide