Follow These Tips; Problem Solving; Fault Codes - Squarefold Trimmer Module - Xerox Versant 80 Press User Manual

SquareFold Trimmer Module

Follow These Tips

Follow these tips to ensure you get your desired output:
• Always run one or more test prints of your job before running a larger output quantity.
• Review your test prints for truncated images/text.
• If any images or text need shifting, use the various selections from your application's
print driver; refer to your print driver's Help information.
• Remember: it may take one or more test prints before you achieve your desired
output.

Problem Solving

Fault Codes - SquareFold Trimmer Module

If a fault occurs in the SquareFold Trimmer Module, a fault message displays. The
following table provides a list of fault codes for this finisher module and of related fault
codes.
Note
The top covers cannot be opened during normal operation or when the press is idle. The
covers can be opened only when an indicator is lit and a fault occurs within the finisher
module. For indicator details, refer to the control panel information.
Fault code Possible cause
013-100 to 013-109 Paper jam/fault with Module
013-221 to 013-228, Jam or communication error
013-229 to 013-243, with the Module; sensor fails
013-246
25-10
Recommended solution
• Open the Top Left and Right Covers of
the Finisher Module.
• Carefully remove all sheets and paper
scraps from jam clearance areas.
• Close the Top Left and Right Covers.
• Check if the Trimmer Waste Container
is full. If so, empty it and reinsert into
the module. Make sure the container is
pushed in completely.
• Follow any remaining instructions on
the touch screen.
• If fault persists, call for service.
Power Off/On the press. If fault persists, call
for service.
®
Xerox Versant
®
80 Press
User Guide