Xerox Versant 80 Press User Manual page 345

3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
4. If necessary, open the staple cartridge unit as shown and remove the jammed staple.
5. Move the lever on the rear of the staple cartridge unit in the downward direction.
6. While holding the lever down, turn over the unit and remove the staple cartridge from
the unit.
7. Detach the outside staples along the line.
8. Push a new staple cartridge into the unit.
® ®
Xerox Versant 80 Press
User Guide
Standard Finisher / Booklet Maker Finisher
24-29