Changing The Paper Tray Attributes - Xerox Versant 80 Press User Manual

Machine Status
Paper Tray Attributes
The Paper Tray Attributes feature allows the user to change the attributes of a paper
tray, including size, type, and weight.
Note
The Paper Tray Attributes feature appears on the Tools tab only if the system
administrator has made it available to users.
Billing Impression Mode
The Billing Impression Mode defines how the press tracks and records impressions
made on large-size paper such as A3 or tabloid. The type of Billing Impression Modes
used by your press is set during system installation. A Xerox Sales Representative can
confirm the Billing Impression Modes applicable for your press. There are two types of
Impression Mode:
• A3 Impression Mode - For all media sizes (including oversized), counts all impressions
equally.
• A4 Impression Mode - Counts large impressions on media such as A3 and 11 x 17
inches (media that is larger than 8.5 x 14 inches), as their A4 equivalent.
To view the current Billing Impression Mode, press the Machine Status button on the
UI, then select Tools > Billing Impression Mode.

Changing the Paper Tray Attributes

1. Press the Machine Status button on the UI.
2. Select the Tools tab.
3. Select Setup & Calibration > Setup > Paper Tray Attributes.
4. Select a tray.
5. Select Change Settings.
6. If the settings are correct, select Confirm or select Change Settings.
7. If necessary, make the required changes to the tray settings (such as weight, type,
and size).
8. Select Save.
9. Select Confirm.
10. Select Close.
The main Tools screen is displayed.
11. Press the Home button on the UI to return to the main home screen.
11-6
® ®
Xerox Versant 80 Press
User Guide