Fuser Paper Width Information - Xerox Versant 80 Press User Manual

Press Problem Solving

Fuser Paper Width Information

The press is delivered and installed with a standard type fuser that accomodates all
paper width sizes. However, the press allows for the installation of other fuser assemblies
and paper width types for printing specific paper width ranges. When installing a new
fuser, the customer can indicate that the fuser be used for certain paper widths only.
Identifying the fuser width type is performed by connecting the appropriate fuser jumpers
provided in the nationalization kit as well as attaching a colored fuser width clip.
Before using the new fuser, the system administrator must update the NVM width setting
values to match the specific width used for this fuser.
The following table defines the media sizes and width ranges that can be set for the
fuser.
Table 1: Bypass Connector used for Default Paper Width NVM Settings
Range No. Bypass Connect-
or
1 None
2 Black Resistor
Type
3 Blue Type
4 See Note
Note
Refer to the System Administrator Guide on how to set the NVM width.
14-46
Media size Width range
All paper widths 98.0 - 330.2 mm (3.858 - 13.0 in.)
A4/Letter SEF A3 270.4 - 298.0 mm (9.84 - 11.69 in.)
SEF
A4/Letter LEF
11 x 17 in.
12 in.
SRA3 300.0 - 330.2 mm (12.09 - 13.00 in.)
13 in.
Custom 100.0 - 330.2 mm (3.937 - 13.0 in.)
® ®
Xerox Versant 80 Press
User Guide