Loading The Oversized High Capacity Feeder - Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press

Loading the Oversized High Capacity Feeder

This procedure shows you how to load paper into the Oversized High Capacity Feeder.
After opening the tray, register the stack of paper or media
against the front right side of the paper tray. The paper or
media must not be loaded above the maximum fill line.
Move the paper guides to just touch the edges of the stack.
Move both Paper Weight Switches to their appropriate
positions.
The Paper Weight Switches work in conjunction with the
blowers in the tray(s). The blowers help control environmental
conditions in the paper trays and ensure optimum feed
capability:
• Each paper tray has two blowers and two fans. The
blowers are located in the front of each tray, while
the two fans are located on the right-side of the tray.
• The lead edge blower is on at all times and produces heated air if one of the following selections are
made: Coated paper, Transparencies, or plain paper, 29 lb./106 gsm or heavier. The trail edge blower is on
at all times and does not produce heated air.
• The paper trays also have air adjustment levers (switches) on the drawer to regulate the amount of air
flow.
If the paper weight is between 60 gsm and 256 gsm, the position of the air adjustment levers (switches) should be
toward the front of the tray. If the paper weight is between 257 and 300 gsm, the position of the air adjustment
levers (switches) should be positioned toward the rear of the tray.
CAUTION
For paper heavier than 256 gsm, slide both Paper Weight Switches to the heavier weight position (257 gsm - 300
gsm). Failure to do so may result in paper jams.
Note
Additional options are available for the Paper Weight Switches. These additional options are discussed in the
System Administration Guide, Chapter 4, System Administrator Tools. Refer to the section entitled (Common
Service Settings/Paper Tray Settings) Custom Paper Settings for more information.
Push in the tray gently until it comes to a stop. When the loaded tray is closed, the tray position is automatically
adjusted in the front/back direction based on the paper size.
User Guide
Downloaded From ManualsPrinter.com Manuals
Paper
3-15