Fault code
Possible cause
116-790
The settings for stapling are
canceled and prints the data
124-705
The settings for punching are
canceled
124-706
The settings for folding are
canceled
124-709
The number of pages exceeds
the number of pages that can
be stapled
Jam Clearance in the Finisher
Paper Jams in the Post-Process Inserter (Tray T1)
1. Press the Cover button.
2. Open cover 1e and then remove the jammed paper and all paper loaded in the tray.
Note
If paper is torn, check inside the machine and remove it.
3. Fan the paper you removed, making sure that all four corners are neatly aligned, and
then load them again.
4. Push cover 1e until you hear it click into place.
®
®
Xerox
Versant
80 Press
User Guide
Standard Finisher / Booklet Maker Finisher
Recommended solution
Confirm the staple position and try to
print again.
Confirm the punching position and try to
print again.
Confirm the folding settings and try to
print again.
Decrease the number of pages, or cancel
the stapling settings. Resend the print job.
24-13