Fuser Hints And Tips; Extending Fuser Life; Preventing Fuser Damage - Xerox Versant 80 Press User Manual

6. Lift levers 2a and 2b, and remove any paper jams.
7. Close levers 2a and 2b.
8. Close the (OHCF) Top Drawer.
9. Reload paper into the tray and resume printing.

Fuser Hints and Tips

Extending Fuser Life

To extend the life of your fuser, discuss the usage of multiple fusers with your Service
Representative. Multiple fusers provide maximum print output for longer periods of time
and ensure image defects on output are avoided. Depending on the types of jobs run
and their frequency, you may want more than one fuser available, such as the following
for example:
• One fuser roll for narrower paper
• One fuser for wider paper

Preventing Fuser Damage

1. To reduce 11 in./279.4 mm lines and wear marks, you may require the use of two
fusers - one when running 8. 5x 11 in./A4 stock, and the other when running 12 x
18 in./304.8 x 457.2 mm or larger stock. This is especially true for the graphic arts
people.
2. Image quality defects such as marks or spots will occur every 110 mm/4.3 in. on the
prints if the fuser roll is damaged. Defects which occur every 98 mm/3.89 in. indicate
a damaged fuser belt.
® ®
Xerox Versant 80 Press
User Guide
Press Problem Solving
14-45