Loading Paper In Trays 3 And 4 Of The Tandem Tray Module - Xerox VersaLink B71 Series User Manual

Paper and Media
6. To adjust the length and width guides to fit the paper, pinch the guide locks, then slide the paper guides in until
they touch the paper.
7. Slide the tray back into the printer.
8. To change the settings to match the paper loaded in the tray, at the control panel, select the correct options for
paper size, type, and color.
9. To confirm the settings, touch O O K K .
To change the paper settings when the tray is set to Dedicated mode, refer to
LO A D I N G PA P E R I N T R AYS 3 A N D 4 O F T H E TA N D E M T R AY M O D U L E
The control panel displays a warning message when the paper in the tray is in short supply, or when a tray is empty.
To change the paper size in Trays 3 and 4, refer to
To load paper in Trays 3 and 4 of the Tandem Tray Module:
172
Configuring Trays 3 and 4 of the Tandem Tray
Xerox ® VersaLink ® B71XX Series Multifunction Printer User Guide
Configuring Tray Settings.
Module.