Operational Procedure - Thermo Scientific Sorvall MTX 150 Instruction Manual

2
Setting item
Typical setting
1 Press the
to show the keypad display.
2 Press the column of the desired item.
3 Enter the desired numeric value with the
keypad display.
7 8
4 5
1 2
0
5 Make a check, then if you want to change other
setting, press the column of the desired item. If
you do not want to change any other setting,
press the ENTER button.
Use the CE button to cancel input.
Setting range and units

Operational procedure

Given below is a description of the operational procedure for a normal run.
Note Before starting up this machine, carefully read the operation manual for your rotor and make
sure that you have selected the correct type of tubes and entered the correct amount of sample.
2-10 Sorvall MTX 150
button
AC C E L:5
D E C E L:5
9 ×
CE
:
?
6
3 FREE
Enter
Acceleration
(ACCEL)
9
9
Set it to 9.
1-9
Deceleration
(DECEL)
7
7
For free coast, press the FREE
button.
Set it to 7.
1-9
+
free coast (FREE)
Thermo Scientific