Table of Contents
Advertisement
Automatic securing type
(1) Applicable rotor
Basic operation
Setting run conditions
This section will first describe the screen for basic operation (the Run screen). For the display at the
normal operation and the display when setting the run conditions, refer to
Thermo Scientific
Cap (blue)
(without a screw hole)
CAUTION
1. Always use an automatic securing rotor for this micro-ultracentrifuge. The screw-type
rotors are inapplicable.
Automatic securing rotors are not applicable in older models
(RC-M100, RC-M120, and RC-M120EX Centrifuges).
2. The rotor must be gently placed on the drive spindle to avoid damaging the drive shaft.
3. Use only rotors approved for use in the Sorvall MTX 150 (see list of approved rotors in
"Specifications"
on
page
WARNING Do not incline or move the instrument while the rotor is spinning.
Do not place any object on the instrument or lean on the instrument.
CAUTION
1. Do not press the touchscreen with a sharp-pointed object such as a ballpoint pen.
2. If abnormal sound is heard during the operation, stop the operation immediately and
contact a Thermo Fisher Scientific authorized sales/service representative.
Cover (black)
Screw - type for older models
(2) Inapplicable
6-1).
Rotor set handle
Screw cap (with a screw hole)
Cover (blue)
"Touchscreen"
on
page
Sorvall MTX 150
2
1-2.
2-5
Advertisement
Table of Contents
