Thermo Scientific Sorvall MTX 150 Instruction Manual page 87

Press the column of the desired item (Year, Month, Day, Hour, or Minute). Check that the pressed
column turns to red and enter the date and time on the keypad display.
If you want to change the other items, press the column of the other items.
You can also turn the desired column to red by pressing the > button and < button.
If you do not want to change the other items, press the Enter button on the keypad display.
Example:
Year: 2008
Month: December
Day: 11th
Time: 8:58am
If you want to change the setting of the other items on the ADMIN screen, press the ADMIN screen
tab.
5. ID /Contact
Set the centrifuge ID
(4-digit number)
Figure 2-23. (1) Centrifuge ID and service contact setting screen
Press the Machine ID column.
Figure 2-23. (2) Enter Centrifuge ID screen
Thermo Scientific
Figure 2-22. Setting at time screen
When you have two or more centrifuges, you can set the centrifuge ID for each
micro-ultracentrifuge for identification.
Service contact:
Make a memo of your service
person's contact
address.
Press the Service contact column.
Fig. 2-23. (3) Enter Service contact screen
2
Sorvall MTX 150 2-69