Table of Contents
Advertisement
Operation
How to use the option function
1. How to perform a programmed operation
Shown below is how to perform a "programmed operation", that is, how to call a stored set of run
parameters and run this micro-ultracentrifuge accordingly.
(a) If you know the program name you need.
Process
Touch panel operation
1
Turn on the POWER switch on the
micro-ultracentrifuge.
2
Install a rotor.
3
Press the PROGRAM button on the Run
screen.
Thermo Scientific
Screen display and notice
• Touchscreen appears.
• The door unlocks.
• Install the rotor securely on the shaft. (The rotor does not have to be
screwed into the shaft.)
• Always use a quick setting rotor (see
"Applicable rotors"
on
page
2-4.)
PROGRAM button
• The PROGRAM
screen appears.
Sorvall MTX 150
2
2-25
Advertisement
Table of Contents
