Thermo Scientific Sorvall MTX 150 Instruction Manual page 54

2
Process Touch panel operation
7 Enter run parameters as follows:
a) Make sure that the STEP 1 column is
blue, and then press the Edit button. Enter
the run parameters for the STEP 1 on the
keypad display (see
tubes/bottles and rotors"
you want to enter an acceleration or
deceleration rate, press the ACCEL/DECEL
button.
Run parameters of the STEP 1:
SPEED: 150,000 rpm
TIME: 1hr.30min.
TEMP: 20°C
ACCEL: 9
DECEL: 9
b) After entering the run parameters, press
the OK button (If you want to change run
parameters, press the column of the desired
STEP, and make sure that it turns blue. Then
press the Edit button.
c) Enter the run parameters for STEP 2 on
the keypad display in a similar way.
Run parameters of the STEP 2:
SPEED: 120,000 rpm
TIME: 1hr.
TEMP: 20°C
ACCEL: 9
DECEL: 9
d) Enter the run parameters for the STEP 3
on the keypad display in a similar way.
Run parameters of the STEP 3:
SPEED: 100,000 rpm
TIME: 30min.
TEMP: 20°C
ACCEL: 9
DECEL: 9
2-36 Sorvall MTX 150
Screen display and notice
"Preparing
on page 2-3). If
ACCEL/
DECEL button
• You can not skip a step. (If you enter nothing in STEP 1, you cannot
enter anything in STEP 2.)
Edit button
Run button
a) The keypad display appears.
OK button
b) The run parameters entered
for STEP 1 are displayed in
the Enter PROGRAM screen.
c) The run parameters entered
for STEP 2 are displayed in the
Enter PROGRAM screen.
d) The run parameters entered
for STEP 3 are displayed in the
Enter PROGRAM screen.
Thermo Scientific