Thermo Scientific Sorvall MTX 150 Instruction Manual page 58

2
Process Touch panel operation
1 Check that the desired rotor is displayed in
the ROTOR indicator of the RUN SCREEN.
When the desired rotor is not displayed,
pess the ROTOR indicator.
2 Check whether the desired rotor is
displayed in the Rotor Management screen
or not. When the desired rotor is displayed,
press the column of the desired rotor and
press the OK button. When the desired rotor
is not displayed, press the Rotor Catalog
button.
3 Press the column of the desired rotor on the
ROTOR CATALOG screen. Check that the
pressed column turns blue and press the
Enter button.
4 The desired rotor is displayed in the ROTOR
indicator of the Run screen.
2-40 Sorvall MTX 150
Screen display and notice
NO registered rotor
• You can select your rotor in the Rotor Management screen, if you
registered your rotor in advance (see
ROTOR indicator
• The Rotor Management
screen appears.
Nothing is displayed in the
ROTOR indicater by
pressing the Cancel
button.
"Rotor Management" on page
• The ROTOR CATALOG
screen appears.
The pressed column
turns from white to
blue.
• The Run screen
returns to view.
ROTOR indicator
Thermo Scientific
2-49).